The Guide to retrofit Aozoom Projector kit in Geely Emgrand GL

The manufacturing facility Geely Emgrand GL headlight is created with halogen light bulb. As all understand, the illumination of halogen bulb is also dark to drive. Higgins makes a decision to upgrade his front lights with projector hid. We aided him make out an appropriate modification prepare for his headlight.


Every brand automobile headlight has its very own characteristic, the tuning and the aftermarket accessories are not the same. The Geely front lights retrofit with Aozoom HID light bulb and Aozoom bi xenon projector. Open up the auto, took off the bump to pull the front lights assemble.


Made a protective layer on the cover of the housing and after that put it right into the oven for about 10 mins. That can shield the front lights cover and also get the front lights out easily. Cleared OEM headlights that were resealed using silicone, it is tough to do it. After open them up, remove the OEM projector. Set up Aozoom bi xenon projector into the housing.


Due to the fact that the aftermarket projector is not the comparable to the factory one, we require to eliminate the outside component to fit the housing. When the setup were all done, check the light beam pattern to abide to the standard. After completing the light examination, take care of the housing with cool gule to prevent leak.


And after that heat the glue in a consistent temperature. So the front lights housing can adhere to the base closely, and also mounted the screws at the same time. The modification is all done, the cutoff is bright than Higgins's envision. He was pleased to the customized front lights. So that he can drive on road to see a far away, and with a vast version to prevent an unneeded accident.